top of page
2024-0613_module-9183A_300x300px_edited.png

DK-9183A

The DK-9183A is a BLE 5.3 low-power Bluetooth module powered by the Nordic nRF52840 microcontroller (MCU). This core processor incorporates an ARM Cortex M4F and supports high-speed LE PHY protocols at 2M, 1M, and 125k for long-range communication, providing versatile design options. The module has been validated with Bluetooth and Zigbee Mesh protocol stacks and fully supports the 802.15.4 protocol suite. The system development kit is compatible with Nordic nRF5 SDK, NCS SDK, as well as SoftDevice and Zephyr projects, facilitating the development of Bluetooth LE applications. Its GPIO (General Purpose Input/Output) functionality includes QSPI, SPI, UART, I2C, PWM, ADC, NFC (Near Field Communication, NFC A), and USB 2.0 full-speed interfaces, enabling seamless connections to peripheral devices and sensors.

Specification

nRF52840, ARM ® Cortex ® M4 32-bit processor with FPU, 64 MHz

​

1 MB Flash and 256 kB RAM

​​

LE 2M PHY, LE 1M PHY, LE Coded PHY (Long Range)

  •  2 Mbps, 1 Mbps, 500 kbps, and 125 kbps 　

  •  IEEE 802.15.4-2006 – 250 kbps

  • Proprietary 2.4 GHz – 2 Mbps, 1 Mbps

Radio

  • GFSK at 1 Mbps and 2 Mbps, QPSK at 250 Kbps

  • -95 dBm sensitivity in 1 Mbps Bluetooth ® low energy mode-103 dBm sensitivity in 125 kbps Bluetooth ® low energy mode (long range)

  • -20 to +8 dBm TX power, configurable in 4 dB steps

  • On-air compatible with nRF52, nRF51, nRF24L, and nRF24AP Serie -

Power Management

  • 1.7 V to 5.5 V supply voltage range

  • 1.8 V to 3.3 V regulated supply

Security features

  • ARM ® TrustZone ® Cryptocell 310 security subsystem

  • 128-bit AES/ECB/CCM/AAR co-processor

Peripheral interface / Hardware

  • USB 2.0 full speed (12 Mbps) controller

  • QSPI 32 MHz interface

  • High-speed 32 MHz SPI

  • Type 2 NFC-A tag with wake-on field

  • Touch-to-pair support

  • Programmable peripheral interconnect (PPI)

  • 48 general purpose I/O pins (GPIO)

  • EasyDMA automated data transfer between memory and peripherals

  • Nordic SoftDevice ready with support for concurrent multiprotocol

  • 12-bit, 200 ksps ADC – 8 configurable channels with programmable gain

  • 64 level comparator

  • 15 level low-power comparator with wake-up from System OFF mode

  • Temperature sensor

  • 4x4 channel PWM unit with EasyDMA

  • Audio peripherals – I2S, digital microphone interface (PDM)

  • 5x 32-bit timer with counter mode

  • Up to 4x SPI master/3x SPI slave with EasyDMA

  • Up to 2x I2 C compatible two-wire master/slave

  • 2x UART (CTS/RTS) with EasyDMA

  • Quadrature decoder (QDEC)

  • 3x real-time counter (RTC)

Product INFO

The DK-9183A module incorporates Bluetooth® Low Energy technology from the Nordic Semiconductor 52 series, providing exceptional quality control and short lead times. Nordic Semiconductor, a Norway-based fabless semiconductor company, specializes in wireless communication technologies that facilitate the advancement of the Internet of Things (IoT). Its technology portfolio has since expanded to include Bluetooth LE, Matter, Thread, Zigbee, proprietary 2.4G technologies, ANT+, and NFC technologies.

DK-9177A

  • The module supports a comprehensive range of applications for Bluetooth® 5 Low Energy technology, featuring a high-performance ARM Cortex M4-FPU single-chip controller that is suitable for various project requirements. Additionally, it integrates an Ipex connector compatible with external antennas to enhance connectivity.

DK-9181A

  • The module supports a comprehensive range of applications for Bluetooth® 5 Low Energy technology, featuring a high-performance ARM Cortex M4-FPU single-chip controller suitable for various project requirements. Additionally, it integrates a PCB antenna to optimize connectivity.

DK-9183A

  • The module supports a wide array of applications for Bluetooth® 5 Low Energy technology, incorporating a high-performance ARM Cortex M4-FPU single-chip controller that is well-suited for diverse project requirements. Furthermore, it integrates a chip antenna to optimize connectivity.

SA-7351A

  • This DK folder shortcut enables quick access to download the development kit user guide, facilitating the design and rapid initiation of hardware and firmware systems. It supports porting from the Nordic SDK and allows for the efficient development of MCU embedded systems for functional testing and issue debugging within a short timeframe.

bottom of page