.png){kind=small}
>
>
DK9182C
Feature:
The DK-9182C is a BLE 5.3 Bluetooth low energy® module Powered by Nordic nRF52832 MCU (Microcontroller unit) the core processor designed ARM Cotex M4F inside yet enables high speed LE PHY 2M, 1M protocol, also offers flexibility design option, it qualified Bluetooth, mesh profile in stack comprehensive protocol.
The system development kit supported Nordic nRF5 SDK & Soft Device project to enablement your Bluetooth LE application, the GPIO (general purpose input/output) incorporates: SPI, UART, I2C, PWM, ADC, NFC (Near Field Communication, NFC A) for connecting with peripherals and sensors device are available.
Documents
NORDIC
Where to buy
2.4GHz
Specification
-nRF52832, ARM ® Cortex ® M4 32-bit processor with FPU, 64 MHz
-512kB Flash and 64kB RAM
-LE 2M PHY, LE 1M PHY
•1 Mbps, 2 Mbps Bluetooth® low energy mode
•Proprietary 2.4 GHz – 2 Mbps, 1 Mbps
-Radio
•GFSK at 1 Mbps and 2 Mbps.
-96 dBm sensitivity in Bluetooth ® low energy mode
-20 to +4 dBm TX power, configurable in 4 dB steps
-Power Management
•1.7 V to 3.6 V supply voltage range
-Security features
•AES HW encryption with EasyDMA
-Peripheral interface / Hardware
•Type 2 NFC-A tag with wake-on field
•Touch-to-pair support
•Programmable peripheral interconnect (PPI)
•32 general purpose I/O pins (GPIO)
•EasyDMA automated data transfer between memory and peripherals
•Nordic SoftDevice ready with support for concurrent multiprotocol
•12-bit, 200 ksps ADC – 8 configurable channels with programmable gain
•64 level comparator
•15 level low-power comparator with wake-up from System OFF mode
•Temperature sensor
•3x 4-channel pulse width modulator (PWM) unit with EasyDMA
•Autonomous peripheral operation without CPU intervention using PPI and EasyDMA
•Audio peripherals – I2 S, digital microphone interface (PDM)
•5x 32-bit timer with counter mode
•Up to 3x SPI master/3x SPI slave with EasyDMA
•Up to 2x I2 C compatible two-wire master/slave
•UART (CTS/RTS) with EasyDMA
•Quadrature decoder (QDEC)
•3x real-time counter (RTC)
Product INFO
The DK-9182C module build in Bluetooth® Low Energy Technical from the Nordic Semiconductor 52 family are available in exceptionally quality control and short lead time delivery.
Nordic Semiconductor is a Norwegian fabless semiconductor company specializing in wireless communication technology that powers the Internet of Things (IoT).
Technical range was later supplemented by Bluetooth, 2.4G proprietary, ANT+ and NFC technology.
DK-9178C this module is supported comprehensive application for Bluetooth® 5 Low Energy Module build in high performance of ARM Cotex M4-FPU single-chip controller inside with great application projects and integrated Ipex connector compliant with external antennas.
DK-9180C this module is supported comprehensive application for Bluetooth® 5 Low Energy Module build in high performance of ARM Cotex M4-FPU single-chip controller inside with great application projects and integrated PCB antennas.
DK-9182C this module is supported comprehensive application for Bluetooth® 5 Low Energy Module build in high performance of ARM Cotex M4-FPU single-chip controller inside with great application projects and integrated Chip antenna.
SA-7352C this DK folder shortcut could rapid download development kit user guide of document. To implementation and quick start to setup designer of hardware and firmware system porting from Nordic SDK as well as develop MCU embedded system with function testing and issues debugging in a short time