top of page
9180D_300x300px_edited.png

DK-9180D

The DK-9180D is a BLE 5.3 low-power Bluetooth module driven by the Nordic nRF52810 microcontroller (MCU). This core processor incorporates an ARM Cortex M4F and supports high-speed LE PHY 2M and 1M protocols, providing versatile design options. The module has successfully completed comprehensive protocol verification for both Bluetooth and Mesh protocol stacks. The development kit is compatible with the Nordic nRF5 SDK and Soft Device projects, facilitating the development of Bluetooth LE applications. Its GPIO (General Purpose Input/Output) includes SPI, UART, I2C, PWM, and ADC interfaces, enabling seamless connectivity with peripheral devices and sensors.

Specification

-nRF52810, ARM ® Cortex ® M4 32-bit processor with FPU, 64 MHz

​

-192kB Flash and 24kB RAM

​​

LE 2M PHY, LE 1M PHY

  • 1 Mbps, 2 Mbps Bluetooth® low energy mode

  • Proprietary 2.4 GHz – 2 Mbps, 1 Mbps

Radio

  • GFSK at 1 Mbps and 2 Mbps, 　

  • -96 dBm sensitivity in Bluetooth ® low energy mode

  • -20 to +4 dBm TX power, configurable in 4 dB steps

Power Management

  • 1.7 V to 3.6 V supply voltage range

Security features

  • AES HW encryption with EasyDMA

Peripheral interface / Hardware

  • Programmable peripheral interconnect (PPI)

  • 32 general purpose I/O pins (GPIO)

  • Nordic Soft Device ready with support for concurrent multiprotocol

  • 12-bit, 200 ksps ADC – 8 configurable channels with programmable gain

  • 64 level comparator

  • Temperature sensor

  • 4-channel pulse width modulator (PWM) unit with EasyDMA

  • digital microphone interface (PDM)

  • 3x 32-bit timer with counter mode

  • SPI master/slave with EasyDMA

  • Up to 2x I2C compatible two-wire master/slave

  • UART (CTS/RTS) with EasyDMA

  • Quadrature decoder (QDEC)

  • 2x real-time counter (RTC)

Operation Temperature

  • -40 °C to 85 °C

Product INFO

The DK-9180D module integrates Bluetooth Low Energy technology from the Nordic Semiconductor 52 series, delivering exceptional quality control and advantageous short lead times. Nordic Semiconductor, a fabless semiconductor company based in Norway, specializes in wireless communication technologies that support the Internet of Things (IoT). Its technology portfolio has subsequently expanded to encompass Bluetooth, proprietary 2.4G technologies, and ANT+ technology.

DK-9178D

  • The module supports a comprehensive range of applications, featuring a high-performance ARM Cortex M4-FPU single-chip controller, making it suitable for various project requirements. Additionally, it integrates an Ipex connector compatible with external antennas to enhance connectivity.

DK-9180D

  • The module accommodates a diverse range of applications, integrating a high-performance ARM Cortex M4-FPU single-chip controller, which is ideal for various project requirements. Moreover, it incorporates a PCB antenna to optimize connectivity.

DK-9182D

  • The module accommodates a comprehensive range of applications, incorporating a high-performance ARM Cortex M4-FPU single-chip controller, which is well-suited for diverse project requirements. Furthermore, it integrates a chip antenna to optimize connectivity.

SA-7352D

  • is a DK folder shortcut to quickly download the development kit user guide files. This helps to quickly implement and set up hardware and firmware systems, port from Nordic SDK, and develop MCU embedded systems in a short time for functional testing and problem debugging.

bottom of page