DK9177A
DK-9177A is a BLE 5.3 Bluetooth Low Energy® module based on Nordic nRF52840 MCU (microcontroller unit). The core processor is designed as ARM Cortex M4F, supports high-speed LE PHY 2M, 1M and 125k long-range protocols, and provides flexible design options. It complies with the comprehensive 802.15.4 protocol stack for Bluetooth and Zigbee Mesh protocols. The system development kit supports Nordic nRF5 SDK, NCS SDK and Soft Device and Zephyr projects to help you realize Bluetooth LE applications. GPIO (general purpose input/output) includes: QSPI, SPI, UART, I2C, PWM, ADC, NFC (near field communication, NFC A) and USB 2.0 full-speed interface, which is convenient for connecting with peripheral devices and sensors.
Specification
nRF52840, ARM ® Cortex ® M4 32-bit processor with FPU, 64 MHz
1 MB Flash and 256 kB RAM
LE 2M PHY, LE 1M PHY, LE Coded PHY (Long Range)
-
2 Mbps, 1 Mbps, 500 kbps, and 125 kbps
-
IEEE 802.15.4-2006 – 250 kbps
-
Proprietary 2.4 GHz – 2 Mbps, 1 Mbps
Radio
-
GFSK at 1 Mbps and 2 Mbps, QPSK at 250 Kbps
-
-95 dBm sensitivity in 1 Mbps Bluetooth ® low energy mode-103 dBm sensitivity in 125 kbps Bluetooth ® low energy mode (long range)
-
-20 to +8 dBm TX power, configurable in 4 dB steps
-
On-air compatible with nRF52, nRF51, nRF24L, and nRF24AP Series
Power Management
-
1.7 V to 5.5 V supply voltage range
-
1.8 V to 3.3 V regulated supply
Security features
-
ARM ® TrustZone ® Cryptocell 310 security subsystem
-
128-bit AES/ECB/CCM/AAR co-processor
Peripheral interface / Hardware
-
USB 2.0 full speed (12 Mbps) controller
-
QSPI 32 MHz interface
-
High-speed 32 MHz SPI
-
Type 2 NFC-A tag with wake-on field
-
Touch-to-pair support
-
Programmable peripheral interconnect (PPI)
-
48 general purpose I/O pins (GPIO)
-
EasyDMA automated data transfer between memory and peripherals
-
Nordic SoftDevice ready with support for concurrent multiprotocol
-
12-bit, 200 ksps ADC – 8 configurable channels with programmable gain
-
64 level comparator
-
15 level low-power comparator with wake-up from System OFF mode
-
Temperature sensor
-
4x4 channel PWM unit with EasyDMA
-
Audio peripherals – I2S, digital microphone interface (PDM)
-
5x 32-bit timer with counter mode
-
Up to 4x SPI master/3x SPI slave with EasyDMA
-
Up to 2x I2 C compatible two-wire master/slave
-
2x UART (CTS/RTS) with EasyDMA
-
Quadrature decoder (QDEC)
-
3x real-time counter (RTC)
Product INFO
The DK-9177A module has built-in Bluetooth® low energy technology from Nordic Semiconductor’s 52 series, with excellent quality control and short delivery times. Nordic Semiconductor is a Norwegian fabless semiconductor company that focuses on wireless communication technologies to drive the development of the Internet of Things (IoT). The technology range was later supplemented with Bluetooth LE, Matter, Thread, Zigbee, 2.4G proprietary technology, ANT+ and NFC technologies.
DK-9177A
-
The module supports comprehensive applications of Bluetooth® 5 low energy modules. It is equipped with a high-performance ARM Cortex M4-FPU single-chip controller, suitable for various application projects, and integrates an Ipex connector that is compatible with external antennas.
DK-9181A
-
The module supports comprehensive applications of Bluetooth® 5 low energy modules. It is equipped with a high-performance ARM Cortex M4-FPU single-chip controller, suitable for various application projects, and integrates a PCB antenna.
DK-9183A
-
The module supports comprehensive applications of Bluetooth® 5 low energy modules. It is equipped with a high-performance ARM Cortex M4-FPU single-chip controller, suitable for various application projects, and integrates a chip antenna.
SA-7351A
-
This DK folder shortcut allows quick download of the development kit user guide documents to enable and quickly start the design of hardware and firmware systems, porting from Nordic SDK, and developing MCU embedded systems in a short time for functional testing and problem debugging.